Traxxas TXC-4M Extreme Crawler Brushless 4x4 1/ 18 RTR TAN

1/18 scale 4WD rock crawler with 3S brushless power, portal axles, oil-filled GTM Pro shocks and TQ™ 2.4 GHz radio. Ready-To-Drive® with 11.1 V 250 mAh 3S LiPo battery and USB charger with iD®.

TXC-4M™ Extreme Crawler is a compact rock crawler built around a lightweight tube-frame body and a one-piece molded monocoque chassis. Portal axles, triangulated 4-link suspension and a 60° steering angle give it the clearance and agility for technical climbing lines, while the 3S brushless outrunner system combines precise low-speed control on the rocks with real trail speed between obstacles. This version comes with blue body panels and decals.

TXC-4M is rated skill level 1 and is delivered fully assembled with battery and charger. Only four AA batteries for the transmitter and a USB-A power source are needed to get started.

Features

• Clipless tube-frame body with replaceable body panels, interior with driver figure and mounting points for accessory LED light kits
• One-piece molded composite monocoque chassis – battery and ESC sit low on opposite sides for balanced weight distribution
• 3S brushless outrunner motor, 3350 Kv, with laser-etched can and pre-installed pinion gear
• Waterproof 3S brushless ESC with Field Oriented Control (FOC), 6 V BEC, LiPo overvoltage protection and two-stage low-voltage detection
• Three drive profiles: Sport, Trail with trail-tuned drag brake, and Crawl with instant reverse and 100 % hill-holding brake
• Full-time shaft-driven 4WD with locked steel spool axles and 25 % overdrive on the front axle
• Portal axles with 2-gear portals, all-metal gears and sealed ball bearings for more ground clearance and less torque twist
• Single-speed transmission with all-metal gears and ball bearings
• Heavy-duty CV center driveshafts, plus steel driveshafts and U-joints out to the wheels
• Triangulated 4-link suspension front and rear with high-clearance lower links and lay-down shocks
• Oil-filled GTM Pro shocks with anodized aluminum bodies and springs mounted under the shock body for a realistic look
• 60° steering angle with waterproof high-torque 2265 metal-gear servo, high-throw metal servo horn and direct steering (no servo saver)
• Steel front portal weights and steel front axle cover for a low center of gravity and better resistance to rollovers
• 1.3-inch Method Race Wheels® 105 Beadlock replica wheels (3-piece, 7 mm hex) with 1.3 x 2.8-inch Stone Claw™ tires and foam inserts
• TQ™ Compact 2.4 GHz 2-channel transmitter with removable color-matched grip adapter. The receiver also works with TQi transmitters and has dual servo and LED channels
• Rust-resistant coated hex hardware and sealed ball bearings

Included

• TXC-4M Extreme Crawler, fully assembled and Ready-To-Drive®, with clipless tube-frame body
• 3S brushless power system (3350 Kv motor and waterproof ESC)
• TQ™ Compact 2.4 GHz 2-channel transmitter
• 11.1 V 250 mAh 3S LiPo battery with iD®
• USB quick charger with iD®
• Maintenance tools

Required (not included)

• 4 x AA alkaline batteries for the transmitter
• USB-A power source, 2 A and 5 V recommended as a minimum

Specifications

• Scale: 1/18
• Type: Trail / rock crawler, 4WD
• Skill level: 1
• Length: 234 mm
• Width / track: 149 mm
• Height: 107 mm
• Wheelbase: 168 mm
• Ground clearance (center): 43 mm
• Weight: 467 g
• Driveline: Shaft-driven 4WD, locked spools front and rear
• Transmission: Single speed, internal gear ratio 74.1:1
• Steering servo: 2265, waterproof, metal gear, 75 oz-in (approx. 5.4 kg-cm)
• Motor: 3S sensorless brushless outrunner, 3350 Kv, 24 x 16 mm, 18 g
• ESC: 3S brushless, waterproof, 6 V BEC, 34 x 25 x 14 mm, 26 g
• Battery: 3S LiPo 11.1 V 250 mAh with iD®
• Battery compartment: 41 x 22 x 14 mm
• Radio system: TQ™ Compact 2.4 GHz, 2 channels