Cart  

No products

0,00€ Shipping
0,00€ Total

Cart Checkout

Tamiya Mountain Rider 4WD 1 /10 Kit No Radio Trasmitter Maximize

Tamiya Mountain Rider 4WD 1 /10 Kit No Radio Trasmitter

Tamiya Mountain Rider 4WD 1 /10 Kit No Radio Trasmitter

More details

739,00€

p TA47394

Availability: Available

You can purchase this product in installments with Consel. Click here for more information.


Gear change is fun and the mechanism and style of the actual feeling] Electric radio that reproduces Toyota Hilux (RN36 type), a four-wheel drive pickup truck that has gained great support in Japan mainly in the 1980s and still holds a strong popularity This is an assembly kit for a control car. A ladder frame similar to that of an actual vehicle is equipped with an assembled 3-speed transmission with 540 motor specifications, and you can enjoy a light gear change while driving by RC operation. Suspension leaves a metal axle housing Rigid type with a spring and shackle for positioning and a radius rod for the rear. A metal underguard is also provided on the front to support tough running. Also, metal such as ladder frame, leaf springs, axle housing, wheel hub, etc. The assembly that makes full use of parts is full of fun of assembly. The pickup body equipped with a roll bar is made of impact-resistant resin with a high scale feeling. Plated wheels are equipped with large diameter tires with a diameter of 123 mm for a good ride. The lifted style is also attractive.

[Actual vehicle description] Toyota's pickup truck, Hilux, which has been exported to Japan as well as all over the world since the birth of the first model in 1968. It is a third generation Hilux (30/40 series) that appeared in 1978. Developed as an export-only model, the RN36 type is still loved by fans all over the world. It is sporty with a compact, tough, and light vehicle body equipped with a 1968cc 4-cylinder gasoline engine that demonstrates 98 horsepower. Demonstrate powerful driving performance. Furthermore, the rigid axle type suspension has a front leaf spring shackle located at the rear, ensuring a sufficient angle of ground obstruction both front and back, and is also useful in cross-country driving and trial competitions. It also featured a front grille that adopted two round headlights, front and rear over fenders, and a high-profile style with large tires. The RN36 type that was mainly exported to North America, but later , Sale has started in Japan and it is known as “Saburoku”.

[Basic specifications] ● Total length 525 mm, total width 278 mm, total height 275 mm, vehicle weight approximately 3.2 kg. ● Tread = front 200 mm, rear 218 mm ● Wheel base = 287 mm ● Tire width / diameter = front and rear 60/123 mm ● Motor = RS540 type ● Drive system = Vertical motor shaft drive 4WD ● Differential gear system = 6 pinion gear diff both front and rear ● Damper = oil damper both front and rear ● Gear ratio = low 1: 54.63 (4WD) second 1: 40.49 (2WD) top 1: 27.92 (4WD) ● Controller = ESC specification (sold separately)

[Available separately] ● 2 servos and ESC are required in addition to the fine spec 2.4G 4-channel R / C system (transmitter / receiver set) ● 4 AA batteries for transmitter

No customer comments for the moment.

Write your review

Tamiya Mountain Rider 4WD 1 /10 Kit No Radio Trasmitter

Tamiya Mountain Rider 4WD 1 /10 Kit No Radio Trasmitter

Tamiya Mountain Rider 4WD 1 /10 Kit No Radio Trasmitter

Write your review